Checking Job Status; Cancelling A Fax In Progress; Cancelling A Scheduled Job - Brother MFC-7420 User Manual

Note
■
If you did not use up any of the numbers
for Groups, access codes or credit card
numbers, you can 'broadcast' faxes to as
many as 258 different numbers.
■
The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use Dual Access and Delayed
fax.
■
Enter the long dialling sequence numbers
as you would normally, but remember that
each One-Touch and Speed-Dial number
counts as one number, so the number of
locations you can store becomes limited.
(See Access codes and credit card
numbers on page 5-4.)
■
If the memory is full, press Stop/Exit to
stop the job or if more than one page has
been scanned, press Start to send the
portion that is in the memory.

Checking job status

Check which jobs are still waiting in the
memory to be sent. (If there are no jobs, the
LCD shows No Jobs Waiting .)
1
Press Menu/Set, 2, 6.
Fax
6.Remaining Jobs
2
If you have more than one job waiting,
press ▲ or ▼ to scroll through the list.
3
Press Stop/Exit.

Cancelling a fax in progress

If you want to cancel a fax, while the machine
is scanning, dialling or sending it, press
Stop/Exit.

Cancelling a scheduled job

You can cancel a fax job that is stored and
waiting in the memory.
1
Press Menu/Set, 2, 6.
Fax
6.Remaining Jobs
Any jobs that are waiting will appear on
the LCD.
2
If you have more than one job waiting,
press ▲ or ▼ to select the job you want
to cancel.
Press Menu/Set.
—OR—
If you only have one job waiting, go to
Step 3.
3
Press 1 to cancel.
To cancel another job go to Step 2.
—OR—
Press 2 to exit without cancelling.
4
Press Stop/Exit.
Setup Send
3
3 - 8