Setting The Paper Type; Setting The Paper Size - Brother FAX-2820 User Manual

Chapter 2

Setting the Paper Type

To get the best print quality, set the machine
for the type of paper you are using.
1
Press Menu/Set, 1, 2.
2.Paper Type
2
Press ▲ or ▼ to select Plain , Thin ,
Thick , Thicker , Transprncy
(Transparency) or Recycled (Recycled
paper).
Press Menu/Set.
3
Press Stop/Exit.
Note
■
The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you
use transparencies or labels, remove
each sheet immediately to prevent
smudging or paper jams.
■
You can select Transprncy in Step 2 if
Letter , Legal or A4 paper size has
been selected (Menu/Set, 1, 3).
2 - 4

Setting the Paper Size

You can use eight sizes of paper for printing
copies: Letter, Legal, A4, B5, A5, B6, A6 and
Executive and three sizes for printing faxes:
Letter, Legal and A4. When you change the
size of paper you load in the paper tray, you
will need to change the paper size setting at
the same time so your machine can fit an
incoming fax or a reduced copy on the page.
Note
If you selected Transprncy as the paper
type (Menu/Set, 1, 2) you will only be able to
select Letter , Legal or A4 size paper in
Step 2.
1
Press Menu/Set, 1, 3.
3.Paper Size
2
Press ▲ or ▼ to select Letter , Legal ,
A4 , A5 , A6 , B5 , B6 or Executive .
Press Menu/Set.
3
Press Stop/Exit.