Brother DCP-8040 User Manual page 40

Press the Menu numbers.
(ex. Press 1, 1 for Paper Type)
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu. (See the Network User's Guide on the
CD-ROM.)
Main Menu Submenu
4.LAN 1.Setup
TCP/IP
(option)
OR
— —
to select
Menu
Selections
1.BOOT
Method
2.IP Address
3.Subnet
Mask
4.Gateway
5.Host Name
6.WINS
Config
7.WINS
Server
8.DNS Server
The factory settings are shown in Bold with .
to select
Options Descriptions
You can choose the
Auto
BOOT method that
Static
best suits you needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Gateway
address.
[000-255].
[000-255].
[000-255]
Enter the Host name.
BRN_XXXXXX
You can choose the
Auto
WINS configuration
Static
mode.
Specifies the IP
Primary
address of the
Secondary
primary or secondary
server.
Specifies the IP
Primary
address of the
Secondary
primary or secondary
server.
ON-SCREEN PROGRAMMING 3 - 8
to
to accept exit
Page
See
Network
User's
Guide
on the
CD-ROM.