Brother DCP-8040 Quick Setup Manual page 33

Step 2
For Network Interface Cable Users
(For Windows
7
After reading and accepting the ScanSoft
PaperPort
Yes.
8
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
9
When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.
0
Select Network Connection, and then click
Next.
If you want to install the PS driver, select
Custom Install and then follow the on-
screen instructions. When the Select
Components screen appears, check PS
Printer Driver, and then continue following
the on-screen instructions.
30
Installing the Driver & Software
®
98/98SE/Me/NT/2000 Professional/XP)
®
9.0SE License Agreement, click
®
9.0SE will
A
®
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
B
If the DCP is configured for your network,
select the DCP from the list, and then click
Next.
This window will not appear if there is only
one machine connected on the network, it
will be selected automatically.
If the DCP is not yet configured for use on
your network, the Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.
C
When the Brother on-line Registration
screen is displayed, make your selection
and follow the on-screen instructions.