Unfolding The Handle - Toro 20314 Operator's Manual

117-4143
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts and keep all guards
and shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not mow up and down slopes, only mow across;
stop the mower and engine, pick up debris before operating;
look behind and down when reversing.
Setup
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Loosen the handle knobs (Figure 3).
Important: Route the cables to the outside of
the handle as you install the handle.
1. Handle knob (2)
2. Move the handle to the operating position.
3. Tighten the handle knobs firmly by hand (Figure 3).
4
Figure 3