Table of Contents
Advertisement
Quick Links
Cordless Angle Grinder | GWX18V-50PC | 3 601 GB0 610
Product information : Cordless Angle Grinder - GWX18V-50PC - 3 601 GB0 610
Product No
Description
DIN-Text
ID_Text_Ext
Tool name
Voltage_1
ID Country Product
Subject to technical alterations. No liability is accepted for printing errors |1 December
2020
3 601 GB0 610
Cordless Angle Grinder
GWX18V-50PC
18 V
---
Robert Bosch Power Tools GmbH
Max-Lang-Strasse 40-46
DE-70771 Leinfelden-Echterdingen
https://www.boschtoolservice.com
2
Advertisement
Table of Contents
Related Manuals for Bosch GWX18V-50PC
Summary of Contents for Bosch GWX18V-50PC
- Page 1 Cordless Angle Grinder | GWX18V-50PC | 3 601 GB0 610 Product information : Cordless Angle Grinder - GWX18V-50PC - 3 601 GB0 610 Product No 3 601 GB0 610 Description Cordless Angle Grinder DIN-Text ID_Text_Ext Tool name GWX18V-50PC Voltage_1 18 V ID Country Product Subject to technical alterations.
- Page 2 Llame gratis para obtener información para el consumidor y ubicaciones de servicio 1-877-BOSCH99 (1-877-267-2499) www.boschtools.com For English Version Version française Versión en español See page 2 Voir page 27 Ver la página 52 160992A4FH 05-19 GWX18V-50PC.indd 1 6/3/19 7:28 AM...
-
Page 3: Table Of Contents
Additional Safety Warnings ......8 Sanding ............ 23 Safety Warnings Specific for Wire Brush (Wheels and Cups) ....24 Sanding Operations ........8 Using ‘Bosch Toolbox’ app ....... 25 Safety Warnings Specific for Maintenance ..........26 Wire Brushing Operations ......8 Service ............. 26 Symbols ............ -
Page 4: Safety Symbols
A moment of inattention while operating power tools may result in serious personal injury. 160992A4FH 05-19 GWX18V-50PC.indd 3 6/3/19 7:28 AM... -
Page 5: Power Tool Use And Care
Such preventive safe- Do not use a battery pack or tool that ty measures reduce the risk of starting the is damaged or modified. Damaged or power tool accidentally. 160992A4FH 05-19 GWX18V-50PC.indd 4 6/3/19 7:28 AM... -
Page 6: Service
In- capable of stopping small abrasive or workpiece fragments. The eye protection 160992A4FH 05-19 GWX18V-50PC.indd 5 6/3/19 7:28 AM... -
Page 7: Kickback And Related Warnings
Using water or other liquid cool- at the point of pinching. Abrasive wheels ants may result in electrocution or shock. may also break under these conditions. Only use Bosch or Bosch licensed X-Lock Kickback is the result of power tool misuse accessories. Incompatible... -
Page 8: Safety Warnings Specific For Grinding And Abrasive Cutting-Off Operations
160992A4FH 05-19 GWX18V-50PC.indd 7 6/3/19 7:28 AM... -
Page 9: Additional Safety Warnings
Do not use vacuum or other dust collec- tion system when cutting metal. Sparks 160992A4FH 05-19 GWX18V-50PC.indd 8 6/3/19 7:28 AM... -
Page 10: Symbols
Arrow (action in the direction of arrow) Type or a characteristic of current Type or a characteristic of current Type or a characteristic of current Designates Double Insulated Construction tools Grounding terminal Alerts user to warning messages 160992A4FH 05-19 GWX18V-50PC.indd 9 6/3/19 7:28 AM... - Page 11 Association, to United States and Canadian Standards. This symbol designates that this tool is listed by the Intertek Testing Services, to United States and Canadian Standards. This symbol designates that this tool complies to NOM Mexican Standards. -10- 160992A4FH 05-19 GWX18V-50PC.indd 10 6/3/19 7:28 AM...
-
Page 12: Functional Description And Specifications
NOTE: For tool specifications refer to the nameplate on your tool. Accessory speed rating must be equal to or greater than the tool’s speed rating. Do not exceed the recommended wheel diameter. NOTE: Not recommended for use with type 11 cup wheels. -11- 160992A4FH 05-19 GWX18V-50PC.indd 11 6/3/19 7:28 AM... -
Page 13: Basic X-Lock Operation
Available on select Accessory Bosch angle grinders, X-Lock allows tool X-Lock free installation and removal of grinder ac- Mounting Hub cessories (grinding, cut-off wheels, wire brushes, sanding discs, etc.). -
Page 14: Brake Operation
2 seconds, DO NOT use the grind- motor will gradually slow down. Unex- er and have it serviced by a Bosch Factory pected run down time may cause property Service Center or Bosch authorized ser- damage and/or personal injury. -
Page 15: Assembly
(Fig. 4). The handle should always be installed onto the guard protected side of the tool, see figure 6. Use the side handle for safe control and ease of operation. -14- 160992A4FH 05-19 GWX18V-50PC.indd 14 6/3/19 7:29 AM... -
Page 16: Installing Wheel Guards
▼ To remove wheel guard OPERATING ZONE 1. Depress guard release button and ro- tate guard until arrows on guard and collar mount align (Fig. 5). 2. Remove guard from collar mount. -15- 160992A4FH 05-19 GWX18V-50PC.indd 15 6/3/19 7:29 AM... -
Page 17: Mounting And Removing X-Lock Accessories
(see Fig. 7) before fitting the X-Lock the Accessory X-Lock Mounting Hub is accessory. higher than the “V” shaped Clamping Height Gage (located on each side of the X-Lock Accessory Mount), the X- -16- 160992A4FH 05-19 GWX18V-50PC.indd 16 6/3/19 7:29 AM... - Page 18 2. Open the X-Lock Release Lever (Fig. 10): (A) Press on the backside of the lever. (B) Lift the front-side of the lever by pulling. 3. Remove the accessory from the tool with care, preventing it from being dropped. -17- 160992A4FH 05-19 GWX18V-50PC.indd 17 6/3/19 7:29 AM...
-
Page 19: Abrasive Type 27 Grinding Wheel & Sanding Flap Disk Assembly
To install cutting wheel (Fig. 12) see in- structions on page 15. Type 41/1A Wheel Guard Type 41/1A Type 27 Cutting Wheel Cutting Wheel -18- 160992A4FH 05-19 GWX18V-50PC.indd 18 6/3/19 7:29 AM... -
Page 20: Sanding Assembly
5. To remove the sanding assembly from cut-outs with the Clamping Tabs on the the grinder, follow instructions for X-Lock Accessory Mount. Mounting and Removing X-Lock Acces- sories starting on page 15. -19- 160992A4FH 05-19 GWX18V-50PC.indd 19 6/3/19 7:29 AM... -
Page 21: Wire Cup Brush Assembly
Guard to the proper position, as shown in figure 6 on page 14. 2. Follow instructions for “Mounting ac- cessory to the tool” and “Removing the accessories on page 15. Fig. 15 Type 27 Wheel Guard Wire Wheel -20- 160992A4FH 05-19 GWX18V-50PC.indd 20 6/3/19 7:29 AM... -
Page 22: Inserting And Releasing
Paddle Switch TO TURN TOOL “OFF”, release pressure on paddle switch. The switch is spring loaded and will return to the “OFF” position auto- matically. -21- 160992A4FH 05-19 GWX18V-50PC.indd 21 6/3/19 7:29 AM... -
Page 23: Metal Grinding
Allow from user. the tool to stop rotating before laying it down. 3. Apply minimum pressure to the work surface, allowing the tool to operate -22- 160992A4FH 05-19 GWX18V-50PC.indd 22 6/3/19 7:29 AM... -
Page 24: Sanding
To remove paint and to smooth surface irregularities. Coarse 16-24-30 To smooth the rough sanding. Medium 36-50-80 To remove scratches left by previous discs. Fine 100-120 To smooth surfaces for painting, polishing or waxing. Very Fine 150-180 -23- 160992A4FH 05-19 GWX18V-50PC.indd 23 6/3/19 7:29 AM... -
Page 25: Wire Brush (Wheels And Cups)
Applying the side or edge of the brush to cause wire the work piece will result in wire breakage breakage. and shortened brush life. -24- 160992A4FH 05-19 GWX18V-50PC.indd 24 6/3/19 7:29 AM... -
Page 26: Using 'Bosch Toolbox' App
Operating Instructions ▶ Using ‘Bosch Toolbox’ app GWX18V-50PC After pairing your tool with a mobile de- vice you can adjust certain functions or check the status of the power tool using Bosch Toolbox app. A. Help button – tapping this button will bring up help screen.