Download Print this page

Jabra BHF-300 Quick Start Manual

Download this manual

1. Before using your Hands-Free BHF-300

1) Display LED : Power ON(LED1), Link status(LED2), Call Connection status(LED3),

Battery status(LED4)

2) Internal Microphone

3) Volume-UP button

4) Volume-Down button

5) Multi-function button : Power ON/OFF, Send call, End call

6) External charger connector

7) Internal Speaker

2. Charging Your Hands-Free

Use the vehicle power charger provided.

BHF-300 uses a rechargeable battery that must be fully charged before you use it

For the first time.

Connect the supplied vehicle power charger to power socket and then to your

Hands-Free.

The status of indicator on Vehicle charger will be illuminated red

while charging and change to Green when the Hands-Free is fully charged.

It takes approximately 2 hours to fully charge the Hands-free

Page 1 2. Charging Your Hands-Free Use the vehicle power charger provided. BHF-300 uses a rechargeable battery that must be fully charged before you use it For the first time. Connect the supplied vehicle power charger to power socket and then to your Hands-Free.
Page 2 3) Use your phone’s menu to search for Bluetooth audio devices and select “BHF-300” 4) When the phone display asks for a pass key, enter “0000”. The Bluetooth icon appears on the display, once the hands-free successfully paired.
Page 3 Press the multifunction buttons for four seconds in order to turn off the device. 2) Connect the Hands-free to the phone When disconnected, the Hands-free can be re-connected to the phone by simply short pressing the Multi-function button. 3) Answer / End / Place a call To answer a call, short press the Multi-function button.
Page 4 User’s Information Cautions Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1.