Nokia Network Voyager Inline Help; Using Nokia Network Voyager To Monitor A Nokia Ip560 Security Platform; Using The Command-Line Interface - Nokia IP560 Installation Manual

3
Performing the Initial Configuration
You can also access the Nokia Network Voyager Reference Guide and other
Nokia IPSO documentation at the Nokia support site
support.nokia.com) or on the software CD that was delivered with your
appliance (see the doc folder).

Nokia Network Voyager Inline Help

You can access inline help when you use Nokia Network Voyager. Inline help
is the context-sensitive information source for Network Voyager.
To access inline help for a specific subject, click the Help icon next to the
subject. You can also click Help at the top of the Network Voyager window to
get help for the entire window. To close inline help, click Close.
Using Nokia Network Voyager to Monitor a Nokia IP560
Security Platform
After you install and configure your Nokia IP560 security platform, you can
use Network Voyager to monitor its operation. Click Monitor from the
Network Voyager home page to access the monitoring functions.

Using the Command-Line Interface

You can also use the IPSO command-line interface (CLI) to manage and
configure Nokia IP security platforms from the command line. Everything
that you can accomplish with Network Voyager you can also do with the CLI.
To access the command-line interface
1. Log on to the appliance or gateway by using a command-line connection
(SSH, console, or Telnet) over a TCP/IP network as an admin, cadmin, or
monitor user:
54
If you log in as a cadmin (cluster administrator) user, you can change
and view configuration settings on all the cluster nodes. For
information about how to administer a cluster, see the traffic
(https://
IP560 Security Platform Installation Guide