Warranty; Operation - Dometic MoBar50S Operating Manual

• Use for purposes other than those described in
this manual
Dometic reserves the right to change product
appearance and product specifications.
Technical description
Overview: fig. 1
Item Designation
1 Speed rail
2 Towel bar handle
3 Rotomolded ice basket
4 Cutting board
5 Serving tray
6 Storage shelves
The Dometic MoBar50S is made of stainless
steel 304 and can withstand all weather conditions
and crowded festive occasions. The wheels are
designed for heavy-duty use. The rotomolded ice
basket keeps beverages cold for hours.
The speed rail and the extension table are detach-
able.

Operation

Proceed as shown:
• Mounting or detaching speed rail: fig. 2
• Using the rotomolded ice basket: fig. 3
• Emptying the rotomolded ice basket: fig. 4
• Mounting or detaching extension table
(accessory): fig. 5
Cleaning
A
NOTICE! Damage hazard
Do not use sharp or hard objects or
cleaning agents for cleaning as these may
damage the product.
➤Occasionally clean the product with a damp
cloth.

Warranty

Refer to the sections below for information about
warranty and warranty support in the US, Canada,
and all other regions.
United States and Canada
LIMITED WARRANTY AVAILABLE AT
DOMETIC.COM/WARRANTY.
IF YOU HAVE QUESTIONS, OR TO OBTAIN A
COPY OF THE LIMITED WARRANTY FREE OF
CHARGE, CONTACT:
DOMETIC CORPORATION
CUSTOMER SUPPORT CENTER
5155 VERDANT DR
ELKHART, INDIANA 46516
1-800-544-4881 OPT. 1
All Other Regions
The statutory warranty period applies. If the prod-
uct is defective, please contact the manufacturer's
branch in your region (dometic.com/dealer) or
your retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Disposal
➤Place the packaging material in the appropriate
recycling waste bins wherever possible.
M
If you wish to finally dispose of the
product, ask your local recycling centre
or specialist dealer for details about how
to do this in accordance with the appli-
cable disposal regulations.
7