Table of Contents
Advertisement
Ears: Nose, Ear, Eyebrow Trimmer Head
1.
When trimming inner ears, avoid inserting the groomer more than
6mm into ear canal.
2.
Turn the groomer on.
3.
Insert the groomer's cutting unit gently into the ear canal.
4.
Rotate the groomer in a circular motion while gently moving in and out
of ear canal.
Eyebrows: Nose, Ear, Eyebrow Trimmer Head
1.
Guide cutting edges to stray hairs along eyebrows.
2.
For best results, do not use the groomer to define entire eyebrow.
Nose: Nose, Ear, Eyebrow Trimmer Head
1.
Turn the groomer on.
2.
Carefully insert the groomer's cutting unit no more than 6mm
into nostril.
3.
Rotate the groomer in a circular motion while gently moving in and out
of nose.
CLEANING, CARE & MAINTENANCE
Note: Always clean the groomer heads and attachment immediately after
use to ensure maximum performance and a proper operating life.
Cleaning Mini Foil Shaver Head
Note: Do not rinse or lubricate the mini foil shaver with oil as it is
permanently lubricated.
1.
With the head removed from the handle, remove the foil head from the
attachment by pressing the latch button.
2.
Shake to remove excess clippings.
3.
Replace attachment by gently snapping back into place.
Clean the Comb and Trimmer Heads With a Soft Brush (not included)
•
With the head removed from the handle, gently brush out hair clippings
from the cutting system and top of trimmer handle.
Cleaning Heads With Water
•
With the head removed from the handle, rinse ONLY under warm
running water. Do NOT use hot water as this might cause damage.
Note: Do not rinse the mini foil shaver head.
9
Advertisement
Table of Contents
