Delay start
•
•
Press "
" button until the timer programming display jumps to 01 .
•
•
To cancel delay start:
•
Press the + or – button until "00" is indicated on the digital display.
•
Cycle Completion Signal
follows:
•
•
] button and press START button until the display shows H:00.
•
•
] until the display shows "b:02".
•
•
b:00
b:03
•
Intensive drying
The inal rinse uses a higher temperature which improves the drying result.
•
] button and press START the digital display shows "H:00".
•
•
Press button [A] until the display indicates "d:00"
•
Press button [C] (see page 4) to turn intensive drying ON = d:01 or OFF = d:00
•
•
Switching on the appliance
•
•
selected program lashes.
•
The expected program duration lashes on the digital display.
•
•
Interrupting the cycle
•
•
irst leave the door ajar for several minutes and then close. Otherwise, expansion
•
•