Table of Contents
Advertisement
2. Accept the default ID shown in the
will need this ID for Step 9.
3. Choose a passphrase and type it in to the
4. In the
Encryption
field, accept the default authentication type or select None. For security purposes, selecting
None is not recommended.
5. If you do not want this SSID visible to other users, click the
6. Skip the
Client Isolation
7. Click the
Apply button
8. To enable a guest or video WiFi network:
a. Click the
GUEST
b. Click the
slide button
c. Modify the fields as needed and then click the
your settings.
9. Follow the WiFi connection instructions provided with your client device to connect to the gateway.
Use the
SSID name
l
Then enter the passphrase that you created in Step 3 in the appropriate location on the network setup
l
screen of your WiFi client device.
SSID
field or enter the SSID for the network that you want to configure. You
Password
field. If needed, you can change this setting later.
in the
Pending changes...
dialogue to save your settings.
or
VIDEO
button.
next to Enabled.
you selected in Step 2.
field. You will need this passphrase for Step 9.
slide button
next to
Apply button
in the
Pending changes...
Broadcast
SSID.
dialogue to save
11
Advertisement
Table of Contents
