NKC-1X
System Module
Engine Module
Baseband Module
The core part of the transceiver's baseband (see the figure below) consists of 2 ASICs, the
UEM and UPP, and flash memory. The following sections illustrate and explain these
parts in detail.
RF IC
RFCLK
RFIC CTRL
19.44MHz
UPP
MEMADDA
MEMCONT
FLASH 16Mbit
LCD
UEM
Introduction to UEM
UEM is the Universal Energy Management IC for digital hand portable phones. In addi-
tion to energy management, it performs all the baseband's mixed-signal functions.
Most UEM pins have 2kV ESD protection, and those signals considered to be more easily
exposed to ESD, have 8kV protection within the UEM. These kinds of signals are (1) all
audio signals, (2) headset signals, (3) BSI, (4) Btemp, (5) Fbus and (6) Mbus signals.
Page 10
Figure 2: System Block Diagram (simple)
RF Supplies
RF RX/TX
PURX
RF RX/TX
SLEEPCLOCK
32kHz
CBUS/DBUS
AUDIO
BB Supplies
KLIGHT/ DLIGHT
PWR ON
BASEBAND
Nokia Corporation
CCS Technical Documentation
UEM
EXTERNAL AUDIO
CHARGER CONNECTION
DCT4 System Connector
PA supply
BATTERY
EAR
MIC
BUZZER
Issue 1 02/03