Abnormal Occurrence; How To Use Application - Panasonic FV-SCGPW1 Operating And Installation Instructions

Abnormal Occurrence

■ When the error codes appear
If any error code appears on the display, take the following actions:
Error code
※
The Power LED blinks upon error.
(It does not blink even if an error
occurs while the ventilator is not
in operation)
■ Other defects
If PM2.5 concentration does not decrease for a long time even though the ventilator is operating,
•
replace the ventilator filter.
If the temperature or humidity indication are defective, turn off the ventilator and the breaker,
•
and then contact your dealer for repairs.
When the operating switches do not work properly, press the reset switch
•
with a pointed rod. If the problem persists, contact your dealer for repairs.

How to Use Application

Do not use the product near any medical equipment or automatic control
equipment. (automatic doors and fire alarms, etc.)
Radio wave may interfere with the equipment and may cause incident due to malfunction.
Keep at least 15 cm away from the product if you have a cardiac pacemaker.
Radio wave may interfere with the operation of pacemaker.
Keep the product away from devices such as other wireless devices,
microwaves and the devices that use 2.4 GHz signal.
Radio wave may interfere with the equipment and may cause incident due to
malfunction. The product may not work properly depending on locations it is used.
Code Error details
F01 Circuit error
F15
Sensor error
F16
F21 Motor error
Wireless
communication
F41
error
Other error code
WARNING
Action to be taken
Turn off the ventilator and the
breaker, and then contact your
dealer for repairs.
If wireless communication is
not required, disconnect the
wireless LAN connection.
(→page 8)
Turn off the ventilator and the
breaker, and then contact your
dealer for repairs.
7
English