Rinnai Zen I24 User And Installation Manual page 18

RESERVATION MODE ( RESERVATION )
1.4.8
The functioning of the 'reservation mode' will also be mentioned as RESERVATION.
The Rinnai Wifi's thermostat consents you to set time slots for the heating mode every day. It is possible to program
the favourite time slots during which the boiler must maintain a comfortable temperature and those during which it is
allowed to reduce the temperature (night time or whenever nobody is at home).
The specific time reservation works both in 'room temperature' mode and in 'flow temperature' mode and works
exclusively on the heating mode but not on the domestic hot water production.
To activate and program the RESERVATION mode, perform the following steps.:
•
set the intended time on the thermostat (see par. 1.4.1)
•
Press button
•
TIMER
Press button
the icon
.
The first time schedule of the RESERVATION mode has been activated;
•
Press button
TIMER
The programs from number one to three are predefined and cannot
be modified, while the specific time programs number four and five can be personalized;
•
to confirm the selection of the intended time in the program wait a few seconds: the icon of the intended
specifics time slots will stop blinking.
•
The specific time reservation will be completed by defining the temperatures T1 (daytime) and T2 (reduced) in
the menu A (parameters 6 and 7) of the thermostat functions (see par. 1.4.9):
the temperature T1 is used by the boiler during the intended and selected specific times (highlighted in
orange in the time slot); but the temperature T2 is used during the unselected time slots.
To exit RESERVATION mode during the operation:
•
Press the button
By re-activating RESERVATION mode, the system will re-open the previously selected program.
Personalizing the reservation mode
Only the programs four and five can be personalized. The use of 'RINNAI BOILER NZ' application allows to
select a more detailed time slots programming schedule.
To select the time slots, perform the following steps:
•
Press button
TIMER
•
Turn the dial (1) and drag the orange flashing selector of the hour bar on the intended time;
•
Press the dial (2) to confirm the selection of the intended time;
•
Repeat the previous operations until you have completed the intended pattern;
•
The reservation is completed when temperature T1 (daytime) e T2 (reduced) are defined in the menu A
(parameterss 6 and 7) of the thermostat functions (see par. 1.4.8):
the boiler uses temperature T1 in correspondence to the selected time slots (highlighted in orange in the time
schedule); the temperature T2 is used during the unselected time slots.
(1);
once (2):
flashes on the display, meaning that the specific time
several times to select the intended time slot:
: the boiler will go back to normal operation.
TIMER
PUSH
1
until it is possible to select a program
PUSH
2
o ;
. .
18
PUSH
1
ON
2