Technical Data; Id Plate And Marking Data - Master CLOUD Manual For Installation And Use

• Standard support brackets (A).
• Small parts packaging.
• Instructions manual.
Note: brackets for bottom hung (ref. C) and top hung (ref. D) windows have to be
requested apart.

5. Technical data

Model
Force exerted by thrust and traction
Strokes (can be selected at any time)
Power supply voltage
Rated absorbed current
Power absorbed at nominal load
Idle traverse speed
Duration of idle stroke (240-360 mm)
Double electrical insulation
Type of service
Operating temperature
Protection index for electrical devices
Adjustment of connection to window frame
Parallel powering of two or more motors
Synchronised function
Static hold force
Stroke-end at opening
Stroke-end at closing
Length of power cable
Dimensions
Weight
The data indicated in these figures is not binding and is subject to variation without notification.

6. ID plate and marking data

All actuators have
European Union without further requirements.
The marking on the product, packaging and indications for
use provided with the product indicate 'presumed conformity to
the directives' issued by the European Community.
The manufacturer
documentation providing that products have been examined
and evaluated for conformity to directives.
ID plate data are indicated on a polyethylene adhesive label
applied externally on the outside of the container, printed in
black on a grey background. Values conform to EC
requirements in force. See figure for example of labelling.
marking and are destined for use in the
holds the technical
CLOUD/230V
250 N
240, 360 mm
110÷230VAC 50/60Hz
0,180 A
~ 30 W
13,5 mm/s
18 s – 27 s
S
2
- 5 + 65 ºC
Automatic definition of position
YES (max 30 actuators)
Not foreseen
1500N
At absorption of power
At absorption of power
356x56x33,5 mm
0,840 Kg
archive with
CLOUD/24V
24V DC
0,800 A
~ 18 W
12,8 mm/s
19 s – 28 s
YES
of 3 min
IP30
1 m
0,820 Kg
Page 7