Cables And Considerations For Further Additions; Connecting External Playback Equipment; Connecting Record/Playback Equipment - Bose Lifestyle 3 Installation Manual

Svenska Nederlands
O C
PTIONAL ONNECTIONS AND

Cables and considerations for further additions

Figure 30
AUX input connections
Figure 31
Record/playback
connections
36
Italiano Français Svenska
A
DDITIONS
Use standard RCA audio cables, inserting the white connector into the L (left) jack Audio IN
jack and the red connector into the R (right) jack (Figure 30).
• If the component does not have right and left output jacks, use a Y adapter to connect it to
the media center. Appropriate cables and adapters are available at most electronics stores.
• If the component has a digital output, use the corresponding digital input beneath the set of
analog (L and R) inputs. Or, if the component has an optical output, you can use the optical
input on the media center. With either type of digital connection, be sure to use an analog
connection as well.
Note: If you make an optical connection, be sure to activate it following the instructions in
"Activating an optical connection" on page 27.

Connecting external playback equipment

Other playback components, like an audio CD changer, can be connected to the AUX or
other unused inputs on the rear panel of the media center (Figure 30).
Media center connector panel
RCA
audio cable

Connecting record/playback equipment

The rear panel of the media center provides input (AUX) jacks for listening to and output
(Audio OUT) jacks for recording to a cassette tape deck (Figure 31).
Media center
Audio cable
for recording
a tape
or CD
Rear panel
of
record/playback component
From
media center
Audio OUT
Nederlands Español Français Deutsch Italiano
Rear of CD changer or other
playback equipment
Audio cable
for playing
a tape
or CD
To
media center
Audio IN
Deutsch Español Dansk English