Siemens SX1 Repair Documentation page 9

3.4. Repair Documentation:
3.4.1. Description of procedure:
3.4.1.1. Diagnosis:
Visually check the status of the Battery connector. Watch for oxidation and dry solder joints.
3.4.1.2. Repair by component change:
Use hot air blower remove defective Battery connector.
Avoid excessive heat!
Watch surrounding components!
Resolder new Battery connector afterwards.
3.4.1.3. Repair by Software booting:
Not possible!
3.4.1.4. Test:
Retest handset after repair.
3.4.2. List of needed material:
3.4.2.1. Components:
Battery Connector SX1
Placement: X2181
Part-Number: L36334-Z97-C160
3.4.2.2. Jigs and Tools:
Hot Air Blower
Soldering Iron
V 1.0
SX1
Information and Communication Mobile
9
Page of
Company Confidential
Copyright 2003© Siemens AG
40
ICM MP CCQ GRM
Mobile Phones
06/03