Cleaning And Maintenance; Troubleshooting Guide - Guardian AC5109 Use & Care Instructions Manual

UV-C LIGHT REPLACEMENT
UV-C Bulb Replacement Indicator:
The UV light on the display will flash blue when it is time to replace the UV bulb.
1. Remove the filter from the unit.
IMPORTANT: The UV-C bulb should be replaced every 10 months depending on use.
Visit our website www.guardiantechnologies.com to purchase a replacement bulb.
REPLACEMENT PARTS
O
FILTER:
Model No.
FLT5100
Replacement Bulb
Model No. LB5100
CLEANING & MAINTENANCE
CLEANING
• Always unplug the appliance before you clean it.
• Never immerse the appliance in water or any other liquid.
• Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any
part of the appliance.
E-8
2. After removing the filter, use a Philips head
screwdriver to remove 4 screws and detach
the UV-C bulb cover.
3. The UV-C bulb is removed by carefully
grasping the bulb with a clean cloth or tissue
and twisting the bulb ¼ turn. Remove from unit.
4. The UV-C bulb is reinstalled by reversing
the process in Step 3.
5. Replace the UV-C cover and re-attach
with 4 screws.
6. Return filter and back panel before operating unit.
7. Reset the UV light by holding the "UV" button
down for 5 seconds.
Carbon Replacement 4-PACK
Model No. FLT51CB4
Check out our
Filter Replacement Program
www.guardiantechnologies.com
IMPORTANT: To maintain performance of the air
cleaner, use Guardian Technologies GENUINE
Replacement Parts only. To purchase visit our
website www.guardiantechnologies.com.
BODY OF THE APPLIANCE
Regularly clean the inside and outside of the body to prevent dust from collecting.
1. Wipe away dust with a soft dry cloth from the body of the appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.
PRE-FILTER SCREEN
The pre-filter/charcoal layer collects larger dust and debris and should be cleaned monthly or
more frequently depending on use. Remove and clean regularly with the brush attachment of
your vacuum cleaner. This will remove the lint and dirt and help maintain the life of the filter.
(See filter replacement to locate and clean or remove the filter).
Replacement pre-filters are available by visiting our website at www.guardiantechnologies.com.
Note: Do NOT stick any foreign objects or your fingers inside the unit.
Caution: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on and/or in the
unit while cleaning as they will damage the products.
NEVER use alcohol or other solvents.
What is CADR?
CADR stands for "Clean Air Delivery Rate," which indicates the volume of filtered air delivered by
an air purifier. CADR ratings show the effectiveness of how efficient the air purifier is at capturing
fine particles from things like tobacco smoke and plant pollens from the room.
Clean Air Delivery Rate
From air cleaner to air cleaner, compare the CADR numbers. First look at suggested room size.
Then refer to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster
the unit filters the air.
Refer to website for individual model CADR numbers.
PROBLEM
Unit shuts off unexpectedly
or does not operate.
No air circulating from the unit. Unplug unit. Check filter. Clean or replace filter if necessary.
Odors not removed.
™
Discharged air has an odor.
Increase in noise level.
Filter indicator light on display
is flashing.
UV-C indicator light on display
is flashing.
Air quality status remains poor. Check to see if the filter is heavily soiled. Replace if necessary.

TROUBLESHOOTING GUIDE

SOLUTION
Check that the unit is plugged into a working electrical outlet.
Check to see if the motor protector is triggered.
Check that the filter and back panel are installed correctly.
Unplug/replug into the outlet.
Call customer service.
Make sure the filter is clean. Replace if necessary.
Check to see if the filter is heavily soiled. Replace if necessary.
Turn off the ionizer.
Make sure the filter is clean. Replace if necessary.
Replace filter and reset light.
Replace bulb and reset light.
Increase the fan speed to circulate air.
E-9