Installing The Batteries In The Remote Control; Setting Radio Channel Spacing For Dual Voltage And 120V Systems - Bose Lifestyle 12 Series II Owner's Manual

Installing the batteries in the remote control

Figure 16
Installing the remote control
batteries

Setting radio channel spacing for dual voltage and 120V systems

AM196573_05_V.pdf
1. Slide open the battery compartment on the back of the remote (Figure 16).
2. Insert 3 AA or IEC-R6 1.5V batteries, or the equivalent, as shown. Match the + and –
symbols on the batteries with the + and – markings inside the compartment.
3. Slide the battery compartment cover back into place.
Replace the batteries when the remote control stops operating or its range seems reduced.
Alkaline batteries are recommended.
Note: Do not change the settings of the factory-preset miniature switches. See "Changing
the house code settings" on page 28 for information on how to prevent conflicts with other
®
Lifestyle music systems.
3 AA batteries
Dual voltage music centers (which include both 120V and 230V power packs) and 120V
music centers can be set for two types of AM and FM channel spacing.
• Channel spacing for North America is 10 kHz for AM and 200 kHz for FM.
• Channel spacing for Europe is 9 kHz for AM and 50 kHz for FM.
Your dual voltage or 120V music center is factory preset for North American spacing. Select
the channel spacing most appropriate for your area.
To change AM and FM channel spacing:
1. Press OFF to turn off the music system.
2. Press and release the ERASE key under the CD cover. (See Figure 18 on page 19.)
The display indicates US for North American spacing and EU for European spacing.
October 29, 2001
Battery compartment cover
Miniature switches
Setting Up
17