Nespresso Momento 120 User Manual page 19

Machine set-up
Recipe preparation
Hot foam, hot water and hot milk
i
functions are directly accessible
from the home screen.
set language
english german
french dutch
Follow the instructions on the screen to
set the parameters of your machine.
2
Remove the milk tank lid. Rinse with
fresh drinking water. Fill the milk tank
with cold milk and attach the lid
again.
1
S
M
L
Select the right cup (size) for your
drink (refer to page 14). Use the
cup support for small and medium
cups. Move the cup support to the side
if a large cup is used.
Parameters:
• set language
• set time zone
• set time
• set date
• set energy saving modes
• machine configuration
• set temperature
• set cup size
• set recipes
• set recipe lengths
• set access code
• water filter installation (follow the
water filter instructions from step 2)
3
Insert the milk tank back to the
machine. Close the milk tank door to
ensure that the fridge temperature is
maintained (fridge inside machine).
The machine is ready. Enjoy!
2
Place the cup under the outlets. Insert
the capsule into the capsule slot.
1
Once the setup is complete, the ma-
chine starts heating up. Remove the
milk tank from the machine.
WARNING
Use UHT or pasteurised cow milk
only (1.5 – 2.5 % fat). The ideal milk
temperature is 4 °C and must not
be higher than 12 °C. If above 12 °C,
the machine does not allow any milk
recipes.
The indentation on the cleaning
i
tank lid must be on the right side
to correctly insert the milk tank.
Make sure the milk suction pipe is
properly placed into the milk tank.
3
espresso lungo
recommended
ristre o americano
recipe
la e cappuccino
macchiato
Select the recipe. Recommended
recipes for the inserted capsule are
highlighted.
EN . 17