Remote Control Battery Installation - Bosch UML-172 Installation Manual

High Performance LCD Monitors
ACC (Auto Color Selects the Color mode. Continuously press this button to change the
Control) selection.
S. SET Selects the Sound mode main input or sub input (only available when
PIP is enabled).
PC Selects the PC mode (HDMI, DVI, PC). Continuously press this button
to change the selection.
AV Selects the AV mode (AV1, AV2, S-Video). Continuously
press this button to change the selection.
COMP Selects the COMPONENT mode.
2.4

Remote Control Battery Installation

1.
2.
Figure 2.4 Remote Control Battery Placement
3.
Bosch Security Systems, Inc.
Turn the remote over (buttons facing down) and push
down on the cover and slide it off.
Insert two (2) new AAA alkaline batteries, matching the
batteries to the (+) and (-) marks inside the battery case.
Slide the battery cover back into place.
Note: Replace batteries when required or at least once a
year. Dispose of used batteries properly.
Installation Manual
Unpacking | en
F.01U.076.723 | 3.0 | 2009.03
17