Casio IT-800 Series Software Manual page 266

Selection
"Auto" is displayed if the power to the GPS module is on.
FixType
This displays the reliability of the positioning data. Either "3D", "2D" or "-" is shown which
means either three or two-dimensional positioning or that positioning is not possible.
Received
This displays the time of the most recent GPS positioning.
S/N Radio
The satellite number is shown on the left while the intensity of that satellite's signal is indicated in
the bar. The stronger the signal is, the further the bar moves towards the right edge of the screen.
Position Tab
This tab displays the position of the satellite from which the signal is being received.
Figure 4-25
Latitude
This displays the latitude of the positioning results.
Longitude
This displays the longitude of the positioning results.
Heading
This displays the traveling direction of the positioning results.
Speed
This displays the traveling speed of the positioning results.
Always North top
In the Check mode, the displayed direction is always shown with north on top. When the Check
mode is turned off, the traveling direction is shown on top.
Disp Satellites
266