Options And Accessories - Hatco Ultra-Glo UGFF Series Installation And Operating Manual

English
Sign Holder
The optional 9" (229 mm) width x 5-1/2" (140 mm) height display
sign holder is also available for the Portable Foodwarmer used
in a self serve area. (Sign not included.)
NOTE: Display sign holder is only available on the GRFFL
model with toggle switch.
To install the optional sign holder follow these instructions:
1. Remove two outer screws from front of unit.
2. Install sign holder using original screws.
3. Install sign (not provided) and acrylic panel.
Acrylic Panel
Screw
Sign
Holder
Installing Optional Sign Holder (GRFFL Model with Toggle Switch)
Five Pleat Hardcoated Fry Box Ribbon
A five (5) pleated hardcoated fry box ribbon can be added to
hold french fry boxes.
Five Pleat Fry Box Ribbon
Eight Pleat Hardcoated Fry Bag Ribbon
An eight (8) pleated hardcoated fry bag ribbon can be added
to hold french fry bags.
Eight Pleat Fry Bag Ribbon
Form No. GRPM-1020

OPTIONS AND ACCESSORIES

Infinite Control
An optional infinite control is available for a more precise
temperature control. Infinite controls are NOT field retrofittable.
NOTE: Optional infinite control is not available on the GR-B
Model, UGFF series, or units with sign holders.
Food Holding Pans
Third, half and full size stainless steel food holding pans
available.
Wire Trivets
Quarter, half and full size wire trivets in stainless steel or plated
finish.
Chef LED Bulbs
Chef LED bulbs are LED light bulbs that offer energy savings
over incandescent bulbs. Use the following for replacement
bulbs:
120 Volts
2700K: R02.30.185.01
3000K: R02.30.195.01
4000K: R02.30.196.01
230 Volts
2700K: R02.30.197.01
3000K: R02.30.198.01
4000K: R02.30.199.01
13