Performance Specifications - Bogen V150 Specifications

Performance Specifications

MODELS:
(Model Number:
Power Output Rating**)
Frequency Response
Transformer:
Direct:
Distortion
Transformer:
Direct:
Signal-to-Noise†
Fundamental:
With AUX Module:
With MIC Module:
With TEL Module:
Tone Controls
Bass Frequency:
Treble Frequency:
Low Cut Frequency:
Sensitivity
Output Regulation
Output Impedance
Transformer-Coupled:
Direct Coupled:
Balanced:
Unbalanced:
Output Level
Balanced:
Unbalanced:
Inserts
Insert "OUT" Level:
Insert "OUT" Impedance:
Insert "IN" Sensitivity:
Insert "IN" Impedance:
Pre-EQ Output
(on V Series);
Tape Out (on WV Series)
Output Level:
Output Impedance:
Signal/Clip Indicator
Signal Detect Threshold:
Signal Indicator Hold Time:
Clip Detect Threshold:
Clip Detect Hold Time:
AC Power Receptacle
AC Voltage
AC Current
Product Weight
Dimensions
* Typical, @ 1 kHz/0.1% THD/4 ohms
† Referenced to FRP output level, 20 Hz - 20 kHz bandwidth limited
Power Vector Amplifiers,
Rack-Mount (V-Series)
V250: (250W / 340W*)
V150: (150W / 200W*)
V100: (100W / 140W*)
V60: (60W / 85W*)
V35: (35W / 45W*)
45 Hz - 20 kHz; 0/-2 dB
20 Hz - 20 kHz; 0/-1 dB
0.5%**
0.1%**
(.05% typical @ 1 kHz)
-94 dB
-70 dB
-60 dB
-70 dB
100 Hz
(+/- 10 dB minimum)
10 kHz
(+/- 10 dB minimum)
125 Hz
(@ -6 dB/octave)
0.4V (at module bay connector)
2 dB or better, no load to full load
70V, 25V, 8 ohms (bal or unbal)
4 ohms
---------
---------
---------
---------
1 VRMS (@ FRP)
50 ohms maximum
1 VRMS
10k ohms minimum
4 VRMS (@ FRP)
50 ohms maximum
10 mV @ output of module
50 mS green indicator
6V @ output of module
50 mS red indicator
500W max. power, unswitched
120V AC, 60 Hz
V250: 5.5A; V150: 3.5A; V100: 2.0A;
V60: 1.3A; V35: 0.6A
V250: 40 lb.; V150: 35 lb.; V100: 32 lb.;
V60: 28 lb.; V35: 24 lb.
17-1/4" W x 3-7/8" H x 14-3/4" D
(all models)
** THD+N, Maximum, full bandwidth @ FRP
Power Vector Amplifiers,
Wall-Mount (WV-Series)
WV250: (250W / 340W*)
WV150: (150W / 200W*)
WV100: (100W / 140W*)
45 Hz - 20 kHz; 0/-2 dB
20 Hz - 20 kHz; 0/-1 dB
0.5%**
0.1%**
-94 dB
-70 dB
-60 dB
-70 dB
100 Hz
(+/- 10 dB minimum)
10 kHz
(+/- 10 dB minimum)
125 Hz
(@ -6 dB/octave)
0.4V (at backplane connector)
2 dB or better, no load to full load
70V, 25V, 8 ohms (bal or unbal)
4 ohms
---------
---------
---------
---------
---------
---------
---------
---------
4 VRMS (@ FRP)
50 ohms maximum
10 mV @ output of module
50 mS green indicator
6V @ output of module
50 mS red indicator
----------
120V AC, 60 Hz
WV250: 5.5A; WV150: 3.5A;
WV100: 2.0A
WV250: 28 lb.; WV150: 29 lb.;
WV100: 27 lb.
WV100/150/250: 14-1/8" W x 21" H
BBF: 14-1/2" W x 24- 3/4" H x 3-7/8" D
BBS: 16-1/4" W x 26- 3/4" H x 3-7/8" D
WMAD: 16-1/4" W x 26- 3/4" H x 1" D
Power Vector
Mixer
VMIX
+/- 1 dB
(20 Hz to 20 kHz)
----------
0.01%†
-----------
-99 dB
-94 dB
-64 dB
-92 dB
100 Hz
(+/- 10 dB minimum)
10 kHz
(+/- 10 dB minimum)
125 Hz
(@ -6 dB/octave)
0.4V (at backplane connector)
---------
---------
---------
50 ohms @ -4 dBu, 600 ohms
@ -10 dBu, 5 ohms @ -50 dBu
100 ohms
Selectable +4, -10, -50 dBu
(typical when meter reads "0");
+18 dBu max.
0 dBu (typical when meter
reads "0"); + 20 dBu max.
---------
---------
---------
---------
---------
---------
10 mV @ output of module
50 mS green indicator
6V @ output of module
50 mS red indicator
500W max. power, unswitched
120V AC, 60 Hz
0.2A
18 lb.
17-1/4" W x 3-7/8" H x 14-3/4" D
7