Power Vector Amplifier
Product Features
Bogen's Power Vector modular input amplifier series consists of five models, ranging from 35 to 250 watts of
power. Each model accepts up to 8 plug-in modules with 4 levels of priority between modules. Two module bays
also accept signal-processing output modules.
Each input has its own independent volume control and a signal/clip indicator. An 11-segment LED meter indicates
output level, while a motorized master volume control allows smooth and accurate operation of the unit's master
volume control from a remote control panel (sold separately).
FEATURES LIST:
•
5 models ranging from 35W to 250W, with
a large power reserve
•
Capable of handling 70V, 25V, 8-ohm,
and 4-ohm speaker loads
•
8 module bays
•
Wide selection of advanced plug-in modules
(see pages 3 & 4)
•
2 module bays capable of handling signal
processing output modules
•
4 levels of priority between modules
•
11-segment LED output level meter monitors the
output level of the power amplifier, with Peak
and Average meter switch
•
Motorized master volume control that can
be remotely operated
•
Two-color LED for each input channel indicates input
signal and clipping
•
Master Mute function overrides all audio from the
mixer section of the amplifier
•
Lockable switch permits user to select either
transformer-coupled outputs or a direct
low-impedance output
Power Handling
Five amplifier models
offer minimum power
handling capacity of 35,
60, 100, 150, and 250 watts
and each has a
substantial power reserve.
Accessories for Power Vector Amplifier Models
RVCP
Remote Volume
Control Panel
2
PVMC
PVSC
Module
Power Vector Security Cover
Security Cover
•
Bass and treble controls with bypass switch
•
3 priority mute buses are available externally
for system expansion and external control
•
Bridging connection available for expanding number
of Power Vectors in a system
•
125 Hz Lo-cut switch
•
Signal processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
•
Pre-EQ, unbalanced, buffered output signal "post"
all unit controls, but "pre" any external signal
processing equipment inserted
•
Grounded convenience receptacle
8 Module Security Covers (PVMC) included
•
(not on Wall Mount units) (see below)
Front panel security cover (PVSC) with break-away
•
access tabs available (see below)
2 rack spaces high (3-1/2")
•
•
UL/cUL listed
Wall Mount versions and Mixer only version (VMIX)
also available. (see page 6)
RPK87
Rack
Mounting Kit