Table of Contents
Advertisement
Pairing the BLUETREK® SURFACE SOUND COMPACT
Before using the BLUETREK® SURFACE SOUND COMPACT, you must pair it with your
Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that
they can communicate.
To initiate pairing:
1. Place the BLUETREK® SURFACE SOUND COMPACT and your mobile phone within 0.3
meter (1 foot) from each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth®
mobile phone user manual).
3. When the BLUETREK® SURFACE SOUND COMPACT is switched on, press and hold both
the TALK button and the VOL+ button for about 5 seconds until the indicator light
flashes red and blue alternately. And a sound can be heard in the speaker.
4. Once the mobile phone detects the car kit, a "BLUETREK COMPACT" message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or
passkey) is 0000, then press "yes" or "ok" .
If pairing was successful, the indicator light will switch to blue and flashes slowly.
If you haven't started the discovery mode within 5 minutes, it will stop. In this case, you
must start the pairing again as step 3 above.
BLUETREK SURFACE SOUND COMPACT I 8
Advertisement
Table of Contents
