Tools And Materials; Before You Begin - Kohler K-1107 Installation Manual

Tools and Materials

Safety Tape
Glasses Measure
Sealant
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers and website are listed on the back cover. Thanks again for choosing Kohler
Company.

Before You Begin

CAUTION: Risk of product damage. Do not support the bath by the rim.
Observe all local plumbing and building codes.
Unpack and inspect the bath for damage. Return the bath to the carton until installation.
Before installation, ensure proper access to the final plumbing connections.
Install the bath to an adequately supported, level subfloor.
This bath is designed for drop-in or raised-deck installation.
Provide properly dimensioned framing.
The basin area requires no additional support when the subfloor is level and square with the stud
framing. Consider using shims for additional support if the subfloor is uneven.
Verify adequate mounting and connection space for the faucet.
Confirm adequate support for the faucet. Large deck-mount faucets that may be inadvertently used
as a means of support are not appropriate or safe for this installation.
This bath conforms to ANSI Standard Z124.1. All dimensions are nominal.
Illustrations shown may not represent your actual product.
1023730-2-F
Pencil
Knife
Square
Level
Plus:
• Conventional woodworking tools and materials
• Drop cloth
• 2x4 or 2x6 lumber
• Construction adhesive (optional)
• Cement or mortar (optional)
• Water-resistant wall material
• Rags
2 Kohler Co.