Esd Handling; Safety Notes - Fujitsu ESPRIMO Q5020 Service Manual

Service Manual ESPRIMO Q5020

1.3. ESD Handling

Notes on installing and removing boards and components
Before removing any individual modules, always switch the unit off first and disconnect it from the
mains supply.
The workplace must be designed in accordance with the guidelines of the European Federation of
Trade Unions.
Only professional quality tools must be used.
●
Switch the unit off and pull the power plug out of the mains socket.
● Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
Boards with electrostatic sensitive devices (ESD) are marked with the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances, observe the following points:
● You must statically discharge yourself before working with boards (e.g. by touching a grounded object).
● The equipment and tools you use must be free of static charges.
● Remove the power plug from the mains supply before inserting or removing boards containing ESDs.
● Always hold boards with ESDs by their edges.
● Never touch pins or conductors on boards fitted with ESDs.

1.4. Safety Notes

Lithium Battery
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS BELOW.
The lithium battery may be replaced only with an identical battery or with a type recommended by
the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in accordance
with local regulations concerning special waste.
Make sure that you insert the battery the right way round: The plus pole must be on the top!
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt
http://extranet.ts.fujitsu.com/service/
© Fujitsu Technology Solutions GmbH
CAUTION
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Service Manual ESPRIMO Q5020 V1.0.doc
Version:
2008
1.0
page 3 of 13
Page/Pages:
3 of 13