How Do I Transfer Files Between My Mediapad 10 Fhd With A Mac; I Connect My Mediapad 10 Fhd To A Pc, But The Mediapad 10 Fhd Is Not Displayed As A Usb Drive. Why? What Can I Do; Ports/Sensors; What Ports Does Mediapad 10 Fhd Have - Huawei MediaPad 10 FHD Faqs

earlier, first install Windows Media Player 11 to synchronize data with your MediaPad 10
FHD. To do so:
1.
2.
3.
4.
For a PC running Windows 7 or later, you do not need to install any software to synchronize
the PC with your MediaPad 10 FHD.

How do I transfer files between my MediaPad 10 FHD with a Mac?

Connect your MediaPad 10 FHD to the Mac using a USB cable. Your MediaPad 10 FHD is
then displayed as a drive on the Mac. After installing the Android File Transfer application,
you can start to transfer files between your MediaPad 10 FHD and the Mac.
I connect my MediaPad 10 FHD to a PC, but the MediaPad 10 FHD is not
displayed as a USB drive. Why? What can I do?
MediaPad 10 FHD uses MTP and does not support USB Mass Storage mode. With a PC
running Windows 7 or later, your MediaPad 10 FHD is displayed as a storage device, but with
a PC running Windows XP or earlier, install Windows Media Player 11 and the USB driver if
you are connecting your MediaPad 10 FHD to the PC for the first time.
Using MTP, you can access files stored on your MediaPad 10 FHD from the PC.

Ports/Sensors

What ports does MediaPad 10 FHD have?

MediaPad 10 FHD features a 30-pin dock connector, 3.5 mm headset jack, microSD card slot,
and SIM card slot. (The Wi-Fi only version does not have a SIM card slot.)
The dock connector can be used for the following purposes:





The headset jack is compatible with Huawei or iPhone4 earphones
The microSD card slot is compatible with most 2–32 GB.
2
When connected to MediaPad, buttons on the iPhone4 earphone cable cannot be used to adjust the volume.
Connect your MediaPad 10 FHD to the PC using a USB cable. The PC prompts you to
install HiSuite. During the installation, HiSuite provides a link for you to download and
install Media Player 11.
After the download is complete, manually install Windows Media Player 11, and restart
your PC.
After your PC is restarted, connect your MediaPad 10 FHD to the PC, and follow the
HiSuite instructions to install the USB driver.
After the USB driver is installed, go to My Computer, and you can see the drive that
corresponds to your MediaPad 10 FHD. You can then synchronize data.
Connect to computer using a USB cable for charging or synchronization
Connect to the MediaPad 10 FHD laptop docking
Connect to USB drive and USB-to-Ethernet cable
Connect to a TV using an HDMI cable
Connect to a projector using a VGA cable
Huawei Confidential
2
.
Page 9 of 23