Yaesu FT5Dr Operating Manual page 55

Preset International VHF (Marine) Radio Receiver Memory Channels
The frequencies (57 channels) used for the international VHF Marine Radio are regis-
tered in dedicated preset receiver memory channels.
1. Press the [A/B] key to set the A-band as the operating band.
2. Press the [F nemu] key, and then touch [P.RCVR].
If [P.RCVR] is not displayed, touch [BACK
3. Press the [BAND] key to select [INTVHF].
4. Rotate the DIAL knob to select the desired channel.
• For the available international VHF channels, see the following table.
• To stop reception of the international Marine Radio channels, press the [BACK]
key or press the [F nemu] key, and then touch [P.RCVR].
• The preset receiver memory channels cannot be rewritten with another frequency or data.
• To scan the preset receiver memory channels, press the [F menu] key, and then touch
[SCAN].
• If the scan has paused on a signal, rotating the DIAL knob will cause scanning to resume
instantly.
• If the DIAL knob is rotated while scanning is in progress, the scanning will continue up or
down in frequency according to the direction of the DIAL Knob rotation.
• To set the transceiver operation when scanning stops, see "Setting the Receive Operation
When Scanning Stops" on page 44.
International VHF Marine radio frequencies registered
Memory
Frequency (MHz)
channel No.
1 156.050 160.650*
2 156.100 160.700*
3 156.150 160.750*
4 156.200 160.800*
5 156.250 160.850*
6 156.300
7 156.350 160.950*
8 156.400
9 156.450
10 156.500
11 156.550
12 156.600
13 156.650
14 156.700
15 156.750
16 156.800
17 156.850
18 156.900 161.500*
19 156.950 161.550*
* Indicates the frequency of the VHF marine base station. For example: if the preset receiver
memory channel 1 is selected, the base station frequency 160.650 MHz appears and
lights up. Press the [F menu] key, and then touch [REV] displays the Ship Station frequency
156.050 MHz appears and blinks. The frequency lower than the base station frequency by 4.6
MHz is the Ship Station frequency and duplex operation may commence. To return to the
base station frequency, press the [F menu] key, and then touch [REV].
in the preset receiver memory channels
Memory
channel No.
20
21
22
23
24
25
26
27
28
60
61
62
63
64
65
66
67
68
69
] to display [P.RCVR] and then touch it.
Frequency (MHz)
channel No.
157.000 161.600*
157.050 161.650*
157.100 161.700*
157.150 161.750*
157.200 161.800*
157.250 161.850*
157.300 161.900*
157.350 161.950*
157.400 162.000*
156.025 160.625*
156.075 160.675*
156.125 160.725*
156.175 160.775*
156.225 160.825*
156.275 160.875*
156.325 160.925*
156.375
156.425
156.475
Memory
Frequency (MHz)
70 156.525
71 156.575
72 156.625
73 156.675
74 156.725
75 156.775
76 156.825
77 156.875
78 156.925 161.525*
79 156.975 161.575*
80 157.025 161.625*
81 157.075 161.675*
82 157.125 161.725*
83 157.175 161.775*
84 157.225 161.825*
85 157.275 161.875*
86 157.325 161.925*
87 157.375
88 157.425
53