Parts And Controls; Initial Mower Setup; List Of Parts; Adjust The Handlebar - Honda HRN216VYU Owner's Manual

PARTS AND CONTROLS

SMART DRIVE CONTROL
GRASS BAG
(P. 4)
HANDLEBAR
ADJUST
KNOB (2) (P. 3)
OIL FILLER CAP
(P. 6)
®
ROTO-STOP BUTTON
RECOIL STARTER GRIP
REAR DISCHARGE
GUARD (P. 5)
SPARK PLUG
CAP (P. 15)
CARBURETOR
AIR FILTER
(P. 14)
FUEL VALVE ON
(P. 9)
BLADE CONTROL LEVER (P. 8)
THROTTLE LEVER (P. 8)
HANDLEBAR
FUEL TANK CAP (P. 7)
FRONT CUTTING
HEIGHT
ADJUSTMENT
LEVER (P. 6)
MUFFLER
(P. 15)
(P. 8)
REAR CUTTING
HEIGHT
ADJUSTMENT
LEVER
CLIP DIRECTOR
(P. 5)
FUEL VALVE OFF

INITIAL MOWER SETUP

List of Parts

With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorised Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. No.

Grass bag

Grass bag frame

Engine oil

Owner's manual



Adjust the Handlebar

1. With the handlebar adjust knobs in the unlocked position,
carefully raise the handlebar into the mowing position .
(P. 6)
2. Align the adjust knobs with one of the two holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.
Description



HANDLEBAR
ADJUST KNOBS
UNLOCKED
LOCKED
Qty.
1
1
1
1
3