RM-14
Baseband Troubleshooting and Manual Tuning
Service Tool Concept for RM-14 Baseband Tunings
EM calibrations should be carried out in JBV-1 Docking Station equipped with DA-40 Docking
Station Adapter
Note: RF tunings must be carried out in MJ-12 module jig.
Power to JBV-1 should be supplied from an external DC power supply, not FPS-8 prommer
JBV-1 input voltages:
• Maximum + 16 VDC
• Nominal input for RF tunings is +12 V DC
ISSUE 1 11/04
COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
Nokia Customer Care
37