NEM-4
Company Confidential
3 - Service Software
CCS Technical Documentation
If scanning is successful, you will see 'no product' in the bottom of the screen to change
into ENOS SW version inside the phone. See below:
Figure 5: Phone replied correctly to Product scan.
As phone is now correctly connected to FLS-4S or FPS-8 and scanning was successful,
SW update can be started from flashing menu.
Choose Flashing -> FLS-4 Flash (If FLS-4S is used)
Choose Flashing -> FPS-8 Flash (If FPS-8 is used)
The following window will open:
Figure 6: Flashing window
Phoenix SW now automatically reads the Product code, which is stored electronically
inside the phone and picks the files, which are associated to this product.
Copyright 2003 Nokia Corporation
Page 3-12
Issue 1 09/2003
Company Confidential