Flash Programming; Flashing Tool; Flashing Phoenix Interface - Nokia 6275 Baseband Description And Troubleshooting

6275/6275i (RM-154)
Baseband Description and Troubleshooting

Flash Programming

Flashing Tool

• BSI = Used to indicate to the MCU that the prommer is connected and the mobile
terminal is in flashing mode.
• MBUS = Used as a clock signal for synchronizing the serial communication
between the prommer and the MCU.
• FBUSRX = Data to the D2800.
• FBUSTX = Data to the prommer.
• VPP = 0v/1.8v/8.8V (read only/normal operation or slow programming/fast
programming).

Flashing Phoenix Interface

1. Run EZ Flash in Phoenix to flash the mobile terminal.
2. Click Select to search for the appropriate software.
Page 34
Figure 41: EZ Flash in Phoenix
Figure 42: EZ Flash in Phoenix
Company Confidential
Nokia Customer Care
Issue 1 - September 2006