Nokia RH-6 Series Rf Description & Troubleshooting page 67

CCS Technical Documentation
Set operating mode to local mode.
Select
Wait until the TX IQ Tuning window pops up.
Select
Wait until the RF Controls window pops up.
Connect a Spectrum Analyzer or GSM tester with the option *Narrow Spectrum' to the
RF connector of the phone.
If a spectrum analyzer is used then use the following settings.
Select in the RF controls window:
Select
Select in the TX IQ Tuning Window:
Select
Press
Select again in the RF Controls Window:
Issue 1 10/2003
Company Confidential
Maintenance
Maintenance
Center Frequency
Frequency Span
Resolution Bandwidth
Video Bandwidth
Sweep Time
Sweep Type
Detector Type
Reference level
Marker 1
Marker 2
Marker 3
Band GSM 1800
Active UnitTX
Operation ModeBurst
RX/TX Channel 700
TX PA Mode
TX Data Type All1
Load from Product
Start
Copyright © 2003 Nokia Corporation.
Company Confidential
7 - RF Description & Troubleshooting
Tuning
TX IQ Tuning
Tuning
RF Controls
GSM1800
1747.8MHz
300 kHz
3 kHz
3 kHz
3 sec.
Clear/Write
Max Peak
35 dBm
1747.73229 MHz
1747.8 MHz
1747.86771 MHz
Free
RH-6
Alt-M
T
I
Alt-M
T
F
Page 67