Attaching Your Camera To This Unit - Sony Party-shot IPT-DS1 Operating Instructions Manual

Attaching your camera to this unit

Before attaching your camera
Check the following.
The internal memory and "Memory Stick Duo" media have sufficient free space.
ˎ
The batteries are installed.
ˎ
Make sure the batteries are charged.
Make sure that the date/time setting of your camera is set correctly.
ˎ
For details, refer to the operating instructions of your camera.
¦
Notes
For DSC-WX1 users
Before attaching your camera to this unit, check the flash settings of your camera.
You cannot change the settings after it is attached to this unit.
How to attach your camera to this unit
This manual describes how to use this unit with the DSC-TX1. The illustrations may
look different from your current settings if your camera is not the DSC-TX1.
Align the camera boss with the tripod receptacle, and the multi connector with the
ˎ
multi connector at the bottom of your camera.
Set your camera perpendicular to the plate.
ˎ
18-GB