Internal Memory; Printing; Pictbridge Compliant Printer - Sony NSC-GC1 Network Sharing Camera Handbook

Troubleshooting

Internal memory

Cannot playback or record images using the internal memory.
There is a "Memory Stick Duo" inserted in the camera. Remove it.
•
Cannot copy the data stored in the internal memory to a "Memory Stick Duo".
The "Memory Stick Duo" is full. Check the capacity.
•
Cannot copy the data on the "Memory Stick Duo" or the computer to the
internal memory.
Data on a "Memory Stick Duo" or a computer cannot be copied to the internal memory.
•

Printing

Also see "PictBridge compliant printer" (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
When printing images using your own printer, cancel the trimming or borderless settings.
•
Consult the printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether they can print the
images without cutting off both edges.
Cannot print images with the date.
This camera does not have a feature for superimposing dates on images. However, because the
•
images shot with the camera include information on the recording date, you can print images
with the date superimposed if the printer or the software can recognize Exif information. For
compatibility with Exif information, consult the manufacturer of the printer or the software.
When you print images at a shop, images can be printed with the date if you ask them to do so.
•

PictBridge compliant printer

A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] (page 60).
•
Disconnect and connect the USB cable again. If an error message is indicated on the printer,
•
refer to the operating instructions supplied with the printer.
71