Mazda MX-30 2021 Disposal Manual page 13

4) Remove the service hole cover.
5) Wear insulating gloves and remove the service plug using the following procedure.
Warning
• Touching the terminal on the vehicle side can result in serious injury or death from
removing the service plug, cover the vehicle-side terminals with insulating tape so that
they cannot be touched.
• Do not touch high voltage parts for 10 min after removing service plag.Electric
charges may be stored on the condenser for 10 min after the service plag is removed,
and touching high voltage parts during that time can result in serious injury or death from
electric shock.
• Service plugs must be removed by workers removing high voltage parts.
Keep the removed service plug on your person untill removal of the high voltage parts is
completed to prevent other workers from accidentally installing the service plug.
Caution
• After removing the service plug, cover the vehicle side terminals with insulating tape to
prevent foreign matter from adhering to them.
• When you are keeping the service plug on your person, cover the service plug terminals
with insulating tape to prevent damage to them.
• Do not switch the main power ON (READY on) after removing the service plug. If the main
power is switched ON (READY on) after removing the service plug, the vehicle may
malfunction.
13