Lucent Technologies TRANSTALK 9000 Installation Manual page 32

MERLIN 206/410/820 and MERLIN Plus system buttons should
be assigned as follows; 2, 3, 4, and 5 are line or feature buttons:
To use MERLIN LEGEND system feature codes with this phone,
program the top right-hand button as a system Feature button.
This will permit you to use the wide array of LEGEND system
features by turning the set on, pressing the system Feature
button, and dialing the appropriate " * " code number. Your
cordless phone's
ming mode. It does not work when using MERLIN LEGEND
system features.
MERLIN 1030/3070, MERLIN II, and MERLIN LEGEND system
buttons should be assigned as follows; 3, 4, and 5 are line or
feature buttons:
28
4
3
PSTAT
MSG
ON
RANGE
2
button only allows you to enter program-
[Feat]
4
3
PSTAT
MSG
ON
RANGE
5
BATT
5
BATT