Table of Contents
Advertisement
Introducing the HP ProCurve RSVLC-0501
Back of the Access Point
The access point also supports connectors for various external antenna
options that offer extended radio range and specific radio coverge patterns.
For further information, see chapter 4, "Using an External Antenna with the
RSVLC-0501".
Lock
The access point includes a Kensington security slot on the side panel, marked
with the lock symbol (
access point by wrapping the Kensington security cable (not provided) around
an unmovable object, inserting the lock into the slot, and turning the key.
Console Port
This port connects a console to the access point using a serial cable. This
connection is described under "Connect a Console to the Access Point" in
chapter 2, "Installing the RSVLC-0501". The console can be a PC or worksta-
tion running a VT-100 terminal emulator, or a VT-100 terminal.
Network Port
The access point includes one 10/100Base-TX port. This port uses the "HP Auto
MDIX" feature, which means that you can use either straight-through or
crossover twisted-pair cables to connect the access point to a switch or
workstation.
Refer to the following section for information on supplying power to the
access point through its RJ-45 port from a network device, such as a switch,
that provides Power over Ethernet (PoE).
Power Connector
The RSVLC-0501 does not have a power switch; it is powered on when
connected to the AC power adapter, and the power adapter is connected to
an active AC power source. The access point's power adapter automatically
adjusts to any voltage between 100--240 volts and either 50 or 60 Hz. There are
no voltage range settings required.
C a u t i o n
Use only the AC power adapter supplied with the access point. Use of other
adapters, including adapters that came with other HP network products, may
result in damage to the equipment.
1-6
). You can prevent unauthorized removal of the
Advertisement
Table of Contents
