2. Close the
psu
hinge.
3. Install the cover.
4. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the cover.
3. Open the
psu
hinge.
4. Remove the
memory
module.
5. Remove the
graphics
6. Remove the
solid state
7. Remove the
WLAN module and SMA
8. Remove the
heat sink
9. Remove the
Voltage regulator heat
10. Remove the processor.
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
70
Disassembly and reassembly
after working inside your
before working inside your
card.
drive.
antenna.
assembly.
sink.
computer.
computer.