Hard Drive; Removing The 3.5-Inch Hard Drive - Dell Precision 3640 Tower Service Manual

Steps
1. Align the notch on the memory module with the tab on the memory module connector of the system board.
2. Press the memory module until the retention tabs clicks into place.
Next steps
1. Close the psu hinge.
2. Install the cover.
3. Follow the procedure in

Hard drive

Removing the 3.5-inch hard drive

Prerequisites
1. Follow the procedure in
2. Remove the cover.
3. Open the psu hinge.
About this task
The following images indicate the location of the 3.5-inch hard drive and provides a visual representation of the removal
procedure.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly 29