Garmin G3X Touch Manual page 42

The airplane will navigate in GPS mode throughout the intermediate portion of the approach
procedure. When the airplane is inbound towards the final approach course, the CDI will
automatically slew to the inbound course.
13. Verify ------------------------------------------------------------------ Course pointer slews to the front course
14. Upon reaching the GPS course, turn inbound and follow the GPS course.
15. Verify on the HSI the Navigation mode indicates the approach being flown, (LNAV or LP)
16. Set Minimum Descent Altitude (MDA) --------------------------- Touch the Reference Altitude display.
17. At the Final Approach Fix (FAF), begin descent to an intermediate altitude or the Minimum
Descent Altitude.
18. At the Minimum Descent Altitude, Set Missed Approach Altitude - Touch the Reference Altitude
display. Enter the Missed Approach Altitude.
19. At Missed Approach Point, Continue visually for a normal landing,
•
Press GO AROUND button and fly the missed approach procedure.
VOR APPROACH
1. Load the approach into the External navigator ----------------------------------Verify external navigator
2. Navigation Source ---------------------------------------------------- Select GPS on the external navigator
3. Approach Minimums----------------------------------------------- Set the barometric minimums alert bug:
4. G3X Touch CDI source ------------------------------------------------ Touch the HSI display on the PFD.
5. Select the external navigator from the CDI Source window (GPS 1 or 2).
6. Press and Hold BACK Button to return to normal PFD display.
If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator, Verify CDI changes slews to the inbound
course from the FAF to the runway.
8. Navigation Source --------------------------------------------------- Select VOR on the external navigator.
9. G3X Touch CDI source ------------------------------------------------ Touch the HSI display on the PFD.
10. Select the external navigator from the CDI Source window (VOR 1 or 2).
FAA Approved AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e | 4-10
NOTE
OR
tunes the proper frequency. Select it as the active frequency.
•
On the PFD, Touch the HSI.
•
Touch the Highlight Minimums window.
•
Enter Barometric Altitude Minimums and touch ENTER
Enter the Minimum Descent Altitude.
PFD Options window opens.
PFD Options window opens.
190-01754-01 Rev. 4