Siemens SIMATIC S7-300 Manual page 42

5 Commissioning of the Application
5.2 Downloading the STEP 7 project
No.
If you are using an S7-400 station, select the
4.
CP_441-2 S7 station and download the entire
project to your CPU.
"PLC > Download"
Double-click on the CPU and then click on
Connections. NetPro opens. Select the SI-
MATIC 400 station and download it to the CPU.
Variant for the ET 200S 1SI communications module
Table 5-8
No.
In the SIMATIC MANAGER, set the PC inter-
1.
face to TCP/IP.
"Options > Set PC/PG Interface"
2. Select the access path. For the used network card, select
TCP/IP.
Then click on the "Properties..." button. In the "Properties"
dialog box, select the "Assign project-specific IP address" option.
Then confirm twice with "OK".
("Configuring the PROFINET interface" manual, see \11\
3. Select the ET 200S_1SI S7 station and down-
load the entire project to your CPU.
"PLC > Download"
42
Action
Action
Remark
Remark
)
Sending and Receiving SMS Messages with MD720-3
V 2.1, ID Number: 25545680