Table of Contents
Advertisement
Repair Instructions
48
Install fuel and oil filters bracket.
NOTE! Mounting for injector pipes in the bracket.
Wrench 10 mm, 13 mm and 17 mm.
49
Install the fuel filter together with the EDC unit and
pipes/ hoses (fuel injection pump filter and feed pump
filter). Wrench 10 mm, 13 mm and 17 mm.
Install the air hose between the electronic diesel con-
trol (EDC) unit and the intake pipe.
84
50
Install the generator (GEN) and generator belt.
Wrench 11/16", 5/8", 12 mm, 13 mm.
Tension the generator belt. See "Checking belt ten-
sions".
51
Install the oil cooler complete with terminal housing
for the oil filter. Use new O-rings. Wrench 12 mm.
Install the terminal adapter for the oil filter (42/43/44/
300). Install the hoses from the oil filter adapter – ter-
minal housing (42/43/44/300). Wrench 12 mm + large
adjustable wrench.
Hide quick links:
Advertisement
Table of Contents
