Table of Contents
Advertisement
SIM Card and Battery Installation
1. Remove the battery cover.
2. Slide the SIM card into the
recess so that the notch in the
card lines up with the notch in the
recess.
3. Align the contacts on the battery
with the contacts in the battery
compartment and press
downwards toward the contacts
until the battery clicks into place.
4. Replace the battery cover.
Note: If the SIM card is inserted
incorrectly, "Check Card" is displayed. Remove the SIM card and re-insert it. If the
card does not work, contact your service provider.
Charging Your Battery:
•
Charge the battery by inserting the adapter plug into the port on your Personal
Communicator and plugging the adapter into a wall outlet.
•
Charge your battery at room temperature and never leave it in really hot, cold, or
wet places.
17
•
Charge only Motorola batteries in your Personal Communicator.
,
Press and hold to turn on or off.
(
Press to accept and end a call, setting, or option.
)
Used to reject or cancel a call, setting, option, and to return to the
previous screen. When in text mode, press to delete the previous
character.
$
Press to enter the Quick Access menu.
%
Press to access the Main Menu.
Use to scroll through menus and text, and increase and decrease
!
volume.
#
Press to read a message.
.
Press to write a message.
M (0 - 9)
Press for ALT and 0 - 9 numbers.
M *
Press for symbols and additional characters.
Smart Button. Use to access your Phone Book and make calls
]
using Voice Tags.
+
Press once to capitalise a letter. Press twice for continuous
capitalisation, press twice to stop capitalisation.
19
Slide Battery
Battery
Door Lock
Compartment
to Open
Slide to Remove
Battery Door
Battery
Charger
SIM Card
Recess
Port
Control Buttons
17
18
}
When the communicator is closed, or in the holster, press to answer
and end a call.
&
Press to start and stop recording voice notes.
Note: use of this feature is subject to varying state, federal, and
country laws regarding privacy of phone conversations.
The Display
ABC123 Displays text and numbers.
/ Signal Strength. The more segments, the stronger the signal strength.
k
A call is in progress or hanging up.
l
Displayed when on a system other than your home system.
:
Home Zone. Availability depends on your service provider.
I
Displayed when a Short Message Service (SMS) message is received.
Flashes when you have an unread SMS message, or your message
storage area is full. (Note: SMS Messaging is a network and
subscription dependent feature and may not be available in all areas.)
J
Displayed when you have voice mail. Availability depends on your
service provider.
19
20
}
]
Advertisement
Table of Contents
