To Read Tuning Values From The Phone; To Read Rssi And Agc Pdm Values From The Phone - Nokia NPD-4 Series Technical Documentation Manual

NPD-4
Troubleshooting — RF

To read tuning values from the phone

Open the "Batch Tune" dialog box, as shown below. To read the tuning values from the
phone, click Read All button under the "phone" heading. However, in order for the tun-
ing values to be displayed, you must first load the template file by clicking Load File but-
ton under the "Parameter File" field. Ensure that the template file used is appropriate for
the software version in the phone.

To read RSSI and AGC PDM values from the phone

Open the "AGC Status" dialog box, which follows. Click "Enable Trace". RSSI is the value
near the antenna on the receiver side. The AGC PDM values are shown beside their
respective variable gain amplifier in the block diagram. The TX AGC PDMs are, as shown
in the diagram from right to left, IF_AGC, RF_AGC, PA_AGC.
Page 48
Nokia Corporation
CCS Technical Documentation
Confidential Issue 1 02/2003