Maintenance; Accessories And Attachments - Bosch CRS180 Operating/Safety Instructions Manual

Service
Preventive maintenance performed by un -
au thorized personnel may result in
misplacing of
components which could cause serious
hazard. We recom mend that all tool service
be performed by a Bosch Factory Service
Center or Authorized Bosch Service Station.
SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready for use.
D.C. Motors
The motor in your tool has been
engineered
dependable service. To maintain peak
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
Standard equipment
- Bosch Reciprocating Saw Blades
To avoid accidents, always disconnect the tool and/or charger from the
power supply before cleaning.
NO USER SERVICE-ABLE
PARTS INSIDE.
internal wires
tool performance
for many hours

Accessories and Attachments

The use of any other attachments or acces so ries not specified in
this manual may create a hazard.

Maintenance

efficiency of the motor, we recommend
it be examined every six months. Only a
genuine Bosch replacement motor
specially designed for your tool should
be used.
Bearings
and
Bearings which become noisy (due to
heavy load or very abrasive material
cutting) should be replaced at once to
avoid overheating and motor failure.
Cleaning
damage plastic parts. Some of these
or
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
LockJaw™ BLADE HOLDER
MAINTENANCE
Periodically lubricate LockJaw™ blade
holder with a dry lubricant such as
graphite.
of
Optional accessories and attachments
- Carrying Bag
-12-
Certain cleaning
agents and solvents