Table of Contents
Advertisement
Available languages
Available languages
TROUBLESHOOTING
PROBLEM
The appliance doesn't work
CAUSE
Be sure it is plugged in and that the electri-
cal outlet is working.
Check for any obstruction.
The power selector is in the "0" position.
The thermostat may be set too low.
Setting the timer
Plug into the outlet.
Remove the obstruction, unplug the heater
and let the appliance cool down. If the appli-
ance doesn't work please contact the nearest
service center.
Turn the functiom selector to the position
1,2,3 or
Turn the thermostat clockwise to a higher
setting until the heater restarts.
Make sure the timer is correctly set to local
time and check the position of the teeth.
13
SOLUTION
.
Advertisement
Table of Contents
